The ThinkPad 13 uses an M.2 SATA SSD, so make sure to buy that type of SSD when you go shopping for a replacement. Before you replace the SSD, make sure you have a way to get your data onto the new one. See our guide to cloning and restoring your hard drive. Make sure to back up your data before starting the process. Here’s how to swap the SSD in your ThinkPad 13. 1. Turn off and close your ThinkPad 13. 2. Flip over the computer and remove the three screwcaps along the bottom. We got them out with a small flathead screwdriver. Place them in a cup or bowl so you don’t lose them. 3. Loosen the 8 screws along the edges of the base and the 1 screw in the center. Use a small Phillips head screwdriver. Note that these screws don’t come out. 4. Pry the cover from the laptop. Lenovo recommends starting at the top left and working clockwise. Be patient, and try using a thin tool like a small flathead screwdriver to get the base off. Take care not to scratch your computer, as the warranty likely won’t cover that. 5. Place the base to the side and locate the SSD. It’s a small, green rectangle screwed into the motherboard. 6. Remove the screw holding the M.2 SATA SSD with a small Phillips head screwdriver. Place the screw in your cup or bowl. 7. Gently lift the SSD from the motherboard. Put it aside and store it in an anti-static bag. 8. Place your new SSD into the housing. Insert it at an angle and lay it flat. 9. Replace the screw to secure the new SSD to the motherboard. 10. Place the base back on, be sure that you press all of the latches back into place and tighten all of the screws. 11. Put the screwcaps back on top of the three screws in the front.
Lenovo Laptop Guide
Previous TipNext Tip
Best Lenovo Laptops and ChromebooksSee How Lenovo Compares to Other Laptop BrandsLenovo Tech Support Rating and Report CardWhat’s in Lenovo’s Standard Warranty?
